High pressure cleaning pump is a kind of high pressure cleaning pump, energy saving cleaning equipment, used in chemical plants, thermal power plants, sugar factories, paper mills and other industries heat exchanger or reactor and all kinds of pipe cleaning. Can also be used for casting sand cleaning, a variety of vehicles, aircraft, ships, slaughterhouses and other cleaning, through the configuration of accessories can also be used for water sandblasting, so as to overcome the high pressure cleaning pump air spray noise caused by environmental pollution, affecting human health and other shortcomings, to do a good job in environmental protection to create conditions.
Research and production practice show that the high pressure water jet cleaning technology is a reliable, economical and practical cleaning technology. Compared with chemical cleaning, high-pressure water jet cleaning technology has the following advantages.
Good cleaning quality
When the high pressure water jet cleans the inner hole of the pipe and heat exchanger, the scale and blockage in the pipe can be removed completely, and the metal body can be seen. The high pressure water jet with high energy and supersonic motion can completely destroy hard scale and blockage, but it does not have any destructive effect on metal. At the same time, because the pressure of high-pressure water is less than the compressive strength level of metal or reinforced concrete, high-pressure water jet cleaning will not damage the cleaned matrix.
Fast cleaning speed
Due to the combined crushing effect of water jet washing, wedge splitting, shear, grinding, etc., the scale can be quickly broken off, which is several times to ten times faster than the traditional chemical methods, sandblasting and shot blasting methods, simple mechanical and manual methods. At the same time, the parts cleaned by high pressure water jet do not need to be cleaned twice; After chemical cleaning, it is necessary to clean the chemical agents on the surface with water.
No environmental pollution
Because the high pressure water jet cleaning is water as the medium, so water jet cleaning is not like sandblasting shot blasting and simple mechanical cleaning to produce a lot of dust, pollute the atmospheric environment, damage human health; It is not like some chemical cleaning, which produces a large amount of waste liquid to pollute the river, soil and water quality. With clean water as the medium water jet, odorless, tasteless, non-toxic, spray jet atomization, can also reduce the concentration of air dust in the working area, reduce to the standard below our country, so it will not cause any pollution. In addition, the recovery of high-pressure water jet cleaning fluid is also relatively easy to achieve technically.
Wide range of application
High-pressure water jet cleaning can clean parts with complex shape and structure, and can be cleaned under narrow and complex space and poor operating environment. There are no special requirements for equipment material, characteristics, shape and scale species, but only require direct shooting, so its application is very wide.
Easy to mechanize and automate.
Energy saving, water saving, low cleaning cost
